Without a doubt, you should have a good, solid tripod as part of your kit. After all, a stable base is one of the most important elements of capturing the best photos, particularly long exposures or photos in low-light situations.
But sometimes, lugging a tripod around just isn’t in the cards. You might also find yourself in a situation in which your tripod is broken or you simply forget it at home.
Then what?
Rather than raise the white flag and give up, there are plenty of tricks to use that will help you overcome the lack of a tripod and get pleasing images in challenging situations.
Table of Contents
- Hold the Camera Like You Mean It
- Find Something to Rest On
- Use a Tripod Alternative
- Make Your Own Monopod
- Change the Camera Settings
Hold the Camera Like You Mean It
Photo by Jakub Maculewicz via Shutterstock
Look around at people taking photos with a DSLR or mirrorless camera, and the chances are that you’ll see a lot of folks not holding the camera in a way that maximizes stability.
What’s common is for people to hold the camera body with one hand, then grab the lens on the side, but without much of a grip.
Instead, try bringing your elbows in toward your chest so they have something to rest on, then move the hand on the lens to its underside, as seen in the image above.
This does two things: first, your elbows now act as a sort of tripod, gaining stability from your core. Second, the hand on the lens takes more responsibility for keeping the camera steady because it’s positioned under the lens, not to the side.
Another option is to use your elbow and knee together to form a tripod. In this instance, you create a stable base by sitting or kneeling on the ground, with your arm then supported by one knee. As seen in the image above, this will work with just about any lens, including a heavy, long telephoto.
Find Something to Rest On
Photo by PeopleImages.com – Yuri A via Shutterstock
For even more stability, pair a proper hold of the camera with a stable object on which you can either rest your body or rest the camera.
For example, you can use a tree, a fence post, a column or wall, or even the body of your car to lean against, thereby helping you to maintain a more stable base.
Sure, it might not be ideally comfortable to lean against something, but if it helps stabilize your body and, thereby, your camera, it’s worth a few seconds of being uncomfortable if it means the photos you take are nice and sharp.
You can also use objects around you as makeshift tripods. A rock here or a table there provides more than enough stability to keep your camera nice and steady.
Use a Tripod Alternative
One of the best options for working without a tripod is to have a device like Octopad to provide your camera with support.
Octoad is an ideal tripod alternative because unlike traditional mini tripods or suction cup supports, Octopad features a patented weighted non-slip mat design that excels in providing stability, even on uneven or smooth surfaces, making it perfect for use on slopes or challenging terrains.
One of its standout features is its universal compatibility. Equipped with a standard 1/4-inch interface, Octopad can easily support DSLRs, cameras, GoPros, smartphones, gimbals, lights, flashes, monitors, and even projectors. The 360° ball head offers complete control over camera positioning, and the non-slip silicone grip ensures your gear stays secure in any condition.
In terms of convenience, Octopad’s small footprint makes it incredibly easy to use. Its compact size (7.9″ x 7.9″ x 4.33″) allows you to achieve lower angles without bulky tripod legs getting in the way of your shot. With the ability to hold more than 17 pounds, Octopad is far quicker and more intuitive than setting up a traditional tripod, saving time and effort for tabletop, macro, or time-lapse photography.
Durability is another highlight. Made from 3750D polyester fiber with reinforced stitching, Octopad is designed to withstand the demands of professional use. Its high-friction rubber base offers a strong grip, ensuring it stays firmly in place during use.
If you’re looking for a compact, stable, and versatile alternative to a tripod, the OctoPad is a must-have for your gear kit!
Keep Reading: Beginner Photography Kit: What You Really Need to Get Started
Make Your Own Monopod
Yet another alternative when a tripod isn’t available is to construct your own monopod.
This can be done quickly and simply:
- Buy a threaded eyelet that you can screw into the tripod mount on your camera.
- Buy a length of cord (here I’m using a bungee cord) that is long enough to reach the ground, with several inches of extra slack left over.
- Tie the cord to the eyelet.
- Secure the string/bungee cord by stepping on it with your foot, using the tension in the string as a makeshift monopod.
That’s it! As simple as a string monopod is, it provides a surprising amount of support.
It’s a method that requires finesse, however. Too much tension will cause the camera to pull downward; not enough tension defeats the purpose. As a result, you’ll need to practice using your DIY monopod to find the ideal amount of tension to keep your camera nice and steady.
Change the Camera Settings
Photo by Ilya Oreshkov via Shutterstock
If you find yourself in dire straits with no tripod and no tripod alternative, you can always adjust your camera settings to make camera shake less likely:
- Open the aperture so your camera collects more light, allowing you to use a faster shutter speed.
- Boost the ISO setting, that way, your camera’s sensor is more sensitive to light, again allowing you to use a faster shutter speed.
Now, there are some complications to this strategy…
Problems to Watch For
If you increase the aperture, the depth of field will be reduced. So, if you’re taking a photo of a landscape, which benefits from a large depth of field, some of the scene might become blurry.
On the other hand, increasing the ISO causes digital noise, which appears like grain in the image. Though noise isn’t all bad and can be used as a creative element, it can also become too prominent and distract the viewer’s eye.
As a result, it might be most prudent to use a larger aperture and a higher ISO. Doing so gives you more light, but without reaching the extremes of the aperture and ISO ranges that cause the most significant blur and noise.
If you need to brush up on your mastery of aperture, ISO, and shutter speed, watch my video below:
The best solution to shooting without a tripod is probably to use a slightly wider aperture and a slightly higher ISO, along with one of the other methods outlined above. Combined with a tripod alternative, an improved shooting position, or a shoestring monopod, you’ll have a recipe for sharper photos without a tripod, even in low-light situations!
Our articles might have affiliate links and the occasional sponsored content, but don’t sweat it – if you buy something, we get a little kickback at no extra cost to you, and we only hype products we truly believe in!
Learn More:
- Photography Tips: Techniques for Beautiful Landscapes
- These Beginner Tips Will Get You Better Photos With Your Action Camera
Hero photo by RBstock via Shutterstock
